Note when rotary cultivator selection tool

   The rotary tiller is the main working part of rotary tller. lts shape and parameters directly affect the quality and power consumption of rotary tiller. Because of soil conditions and agronomic requirements of different choice of tools are also different.

   First of all, the shape of the size of the standard requirements on the role and influence of rotary cultivator, including the material, length, width, thickness,radius of rotation, hardness, bending Angle, projection and other quality parameters. Suitable size and reasonable hardness can only be cut into the ground at an appropriate Angle when farming, that is, friction with the land, to maintain the high efficiency and wear resistance of the rotary cultivator blade, and achieve a high efficiency and high wear resistance.

   If the size of the rotary cultivator blade itself is not qualified, it will lead to the unreasonable Angle of the blade into the soil, seriously reduce the efficiency of farming, but also greatly increase the consumption of rotary cultivator oil; if the hardness of the blade is not good, the high hardness will lead to the blade is easy to break, on the contrary, the low hardness will lead to the blade is easy to deformation, therefore, quality is the fundamental element.

   The arrangement and installation before rotary tillage is an important work. Improper installation will seriously affect the quality of operation. Due to the unbalanced rotation of the rotary cultivator blade, it will lead to damage of parts and increase of vibration of the unit, and it is not safe. Left-bend and right- bend blades should be staggered as far as possible to balance the bearing forces at both ends of the cutter shaft. For the successively buried blades,the greater the axial distance on the blade shaft, the better to avoid clogging.

   In the process of the tool shaft rotation, one tool must be entered at the same phase Angle to ensure the stability of the work and uniform load of the tool shaft. Configure more than two blades, should ensure the same amount of soil cutting, in order to achieve good quality of broken soil, after ploughing ditch bottom level.

   Finally, the compatibility of the rotary cultivator and the speed of the rotary cultivator is also very important.    Among them, blade block type and blade disc type rotary tillage blade are mostly used for pine flat field before sowing. If it is used together with hand dragging type flat field machine, the speed of hand dragging should choose 3 or 4 blocks. The speed of straw returning hand tow is usually 1 or 2 gears, and 1 finger is usually used in actual production.

   Jiangsu Fujie blade industry Co., Ltd. production of deep loose shovel after more than a dozen processes, the use of foreign advanced technology, in strict accordance with the national standard production, to ensure the quality of each blade.