How to use a rotary tiller safely?

  Rotator is characterized by high speed rotation of working parts,and almost all safety problems are related to it.Therefore,special attention should be paid to the following points when using the rotary tiller:

  1. Before using the rotary tller, check all parts, especially check whether the rotary tiller is installed in reverse and whether the fixing bolt and the locking pin of universal joint are reliable. If any problem is found, it should be dealt with in time.

  2. Before the tractor starts, the clutch handle of the rotary tiller should be moved to the separating position.

  3. The rotary tiller should engage the power under the lifting state, until the rotary tiller reaches the predetermined speed, the unit can start, and slowly lower the rotary tiller, so that the rotary tillage blade into the soil. It is strictly prohibited to start the rotary tillage blade directly in order to prevent the damage of the rotary tillage blade and related components. It is strictly prohibited to drop the rotary tiller rapidly, and it is strictly prohibited to reverse and turn after the rotary tiller is in the soil.

  4. When the power is not cut off in the ground turn, the rotary tiller shall not be lifted too high, the transmission Angle at both ends of the universal joint shall not exceed 30 degrees, and the engine speed shall be appropriately reduced. Transfer lot or long distance when walking, should cut off rotary tiller power, and rise to the highest position after the lock.

  5. When the rotary tiller is running, no one is allowed to approach the rotating parts, and no one is allowed behind it, in case the blade is used to hurt people.

  6. When checking the plougher, the power must be cut off. When replacing blades and other rotating parts, the tractor must be extinguished.

  7. Rotator tillage when the speed of advance, early field with 2-3 km hours is appropriate, has ploughed or raked over the field with 5-7 km hours is appropriate, in the paddy field tillage can be appropriate faster. Remember, the speed can not be too high, in order to prevent the tractor overload and damage the power output shaft.

  8. When the rotary tiller works, the tractor wheels should walk on the uncultivated land to avoid compaction of the cultivated land. Therefore, it is necessary to adjust the wheel distance of the tractor so that its wheels are located in the working amplitude of the rotary tiller. When working, we should pay attention to the direction of walking to prevent another wheel of tractor compaction already cultivated land.

  9. During the operation of the rotary tiller, if the cutter shaft is too entangled, it should stop and clean in time to avoid increasing the load of the machine and tools.

  10. When rotary tiller rotary tillage, tractor and diligent hang part prohibit to take a person, in case be hurt by rotary tiller carelessly.

  Jiangsu Fujie dao industry is specialized in the production of agricultural machinery tool manufacturers, the company products are exported to 85 countries and regions, products using high quality materials, after more than a dozen process, products are rotary blade, plough shovel, plow tip, s-shaped springs,chopped wood, cut the grass cutter, claw hammer, reclaiming blade, rake pieces and a variety of products, welcome new and old customers to inquire.